|
METALWORKING
MACHINERY |
|
|
|
* BUY |
|
* SELL |
|
* APPRAISE |
|
* LIQUIDATE |
| * ADVERTISE |
| * LOCATE |
Quotation is for immediate acceptance and subject to change
without notice. It is understood there are no conditions or agreements outside
of this written proposal and that all prior conversations, agreements or
representations with reference to the subject matter are superseded. We
reserve the right to correct typographical errors. Specifications are approximate
only and intended solely as a guide. Title to property described above shall
remain vested in seller until the entire purchase is paid in full. The described
equipment does not incorporate approved activating mechanisms, operator
safety devices, or safety guards as required by O.S.H.A. or otherwise. It
is the purchaser's responsibility that said equipment be so equipped and
safeguarded to meet O.S.H.A. and other requirements before placing such
equipment in operation. We do not imply or guarantee any compliance with
any government safety requirements or standards. It is further understood
and agreed this buyer or subsequent buyers will hold vendor harmless for
causes of action whatsoever. This agreement constitutes the entire contract
of sale of the goods named herein. No modification of this contract shall
be binding upon Seller unless in writing and signed by authorized officer
of Seller.
|
| Date: 09/09/10
|
CST Time: 04:44:09 |
|
|
| We are pleased to quote the following machine
for your consideration: |
|
Please Refer To Machine #
944309
Daewoo Lathe Puma 10HC
L2150 Lathes - Combination N/C & CNC
|
Chuck Size |
10" |
|
Manufacturer |
Daewoo |
|
Model No. |
Puma 10HC |
|
Serial No. |
NA |
|
Year Mfg. |
1996 |
|
Control |
Fanuc OT |
|
Swing |
19.7" |
|
Maximum Turning Diameter |
3" Bar Capacity |
|
Max Center Distance |
|
|
X Axis Travel |
8.3" |
|
Z Axis Travel |
21.7" |
|
Spindle Speeds |
3,500 RPM |
|
Hole Through Spindle |
3" |
|
Turret Configuration |
10 Station Turret |
|
Features/Accessories |
High Torque, 1" Square, 2" Boring Bars |
|
Motor HP |
30 HP |
|
Spindle Nose/Taper |
A2-8 |
|
Condition |
Good Condition |
|
Comments |
Chip Conveyor |
|
FOB Point |
Minneapolis, MN |
|
Price |
$32,500 |
|
|
|
|
|
|
|
|
Sincerely,
Used Machinery Sales LLC.
The Sales Staff
at Used Machinery Sales, LLC.
19131 Industrial Blvd, Suite 2, Elk River, MN 55330
(800)-726-7167 763-441-5152 Fax: 763-441-5075 |
